DRILL CO. Series 7000A Magnum Solid Carbide Burr
- Drill Co 7000A Series Magnum Solid Carbide Bur, Double Cut, Cylindrical Flat End, 1/4″ Shank Diameter, 1/4″ Head Diameter, 5/8″ Cutting Length (Pack of 1)
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid tool holding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Double-cut style has rows of cutting teeth cut in two intersecting directions for fast material removal and a rougher finish
- For deburring, interior contour work
Tool
No. | Cutter
Diameter | Length
of Cut | Single Cut
Part No. | Double Cut
Part No. |
| SA-11 | 1/8" | 1/2" | 7A108BSC | 7A108BDC |
| SA-12 | 1/8" | 5/8" | 7A108ASC | 7A108ADC |
| SA-14 | 3/16" | 5/8" | 7A112ASC | 7A112ADC |
| SA-1 | 1/4" | 5/8" | 7A116ASC | 7A116ADC |
| SA-1L | 1/4" | 1" | 7A116BSC | 7A116BDC |
| SA-2 | 5/16" | 3/4" | 7A120ASC | 7A120ADC |
| SA-2L | 5/16" | 1" | 7A120BSC | 7A120BDC |
| SA-3 | 3/8" | 3/4" | 7A124ASC | 7A124ADC |
| SA-3L | 3/8" | 1" | 7A124BSC | 7A124BDC |
| SA-3XL | 3/8" | 1-1/2" | 7A124CSC | 7A124CDC |
| SA-4 | 7/16" | 1" | 7A128BSC | 7A128BDC |
| SA-5 | 1/2" | 1" | 7A132BSC | 7A132BDC |
| SA-6 | 5/8" | 1" | 7A140BSC | 7A140BDC |
| SA-16 | 3/4" | 3/4" | 7A148ASC | 7A148ADC |
| SA-7 | 3/4" | 1" | 7A148BSC | 7A148BDC |
| SA-9 | 1" | 1" | 7A164BSC | 7A164BDC |
