Uniweld Single Stage RUH83 Series Regulators |

RUH8310

Machined brass body
Polished chrome bonnet
Easy-to-read single scale 2-1/2″ gauges
2″ tri-layered reinforced neoprene diaphragm
Heavy duty mechanical stem type seat and nozzle assembly
Derlin bushing for smooth flow adjustment
Fine mesh filter screen between inlet and seat
Pressure relief device for low pressure gauge protection only

entries per page

Search:

Part No.	CGA Inlet	Outlet Connection	DEL PSIG	Replacement 3-1/2" Gauges
RUH8310	Oxygen 540	"B" (RH) 9/16-18 (M)	5-125	G24S; 200 PSI G27S; 4000 PSI
RUH8311	Acetylene 510	"B" (LH) 9/16"-18 (M)	2-15	G22S; 30 PSI (RL) G21S; 400 PSI
RUH8311-1	Acetylene 300	"B" (LH) 9/16"-18 (M)	2-15	G22S; 30 PSI (RL) G21S; 400 PSI
RUH8311-2	Acetylene 520	"B" (LH) 9/16"-18 (M)	3-15	G22S; 30 PSI (RL) G21S: 400 PSI
RUH8311-CND	acetylene 410	"B" (LH) 9/16"-18 (M)	2-15	G22S; 30 PSI (RL) G21S; 400 PSI
RUH8312	LPG & all fuel gas 510	"B" (LH) 9/16"-18 (M)	2-40	G25S; 40 PSI G21S; 400 PSI
RUH8313	Carbon Dioxide 320	5/8"-18 (RH) (F)	5-125	G24S; 200 PSI G23S; 3000 PSI
RUH8314	Argon 580	5/8"-18 (RH) (F)	5-125	G24S; 200 PSI G27S; 4000 PSI
RUH8315	Nitrogen 580	5/8"-18 (RH) (F)	5-125	G24S; 200 PSI G27S; 4000 PSI
RUH8315A-1	Nitrogen 580	1/4" Flare (M)	5-125	G24S; 200 PSI G27S; 4000 PSI

Showing 1 to 10 of 15 entries

Single stage regulators have pressure rise of approximately 1/2 psi (.5) per 100 psi drop in cylinder pressure

Maximum flow = 6300 SCFH, Free air @ 70°F, no flow restrictions

Note: The standard cubic foot per hour flows are obtained with the regulator outlet full open with no restrictions; using a preset outlet pressure and with decreasing cylinder pressure

PSIG – Pounds per sq. in. gauge

SCFH – Standard cu. ft. per hour

Note: PSI/kPa, PSI/Kg, PSI/BAR gauges are available

Contact Heavy Maintenance Supply 205-384-5284 for more information

Home » Our Manufacturers » Uniweld » Uniweld Single Stage RUH83 Series Regulators

Uniweld Single Stage RUH83 Series Regulators

Search

Our Products

Call HMS, Inc. Today!