Home » Our Products » Wrenches Crowfoot

Wrenches Crowfoot

Proto 1/4″ Drive Fractional Crowfoot Wrenches

  • Crowfoot wrenches are used in hard to reach, restricted access situations where a standard wrench or ratchet cannot reach
  • Anti-Slip Design open end (ASD)
  • The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding
  • Broad size range ensures the right tool for the application will be available.
  • Typically used in lower torque applications
  • Full polish finish provides corrosion resistance and easy to clean surfaces
Part No.
Size
Part No.
Size
J4708CF
1/4"
J4714CF
7/16"
J4710CF
5/16"
J4716CF
1/2"
J4712CF
3/8"
J4718CF
9/16"

Proto 1/4″ Drive Metric Crowfoot Wrenches

  • Crowfoot wrenches are used in hard to reach, restricted access situations where a standard wrench or ratchet cannot reach
  • Anti-Slip Design open end (ASD)
  • The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding
  • Broad size range ensures the right tool for the application will be available.
  • Typically used in lower torque applications
  • Full polish finish provides corrosion resistance and easy to clean surfaces
Part No.
Size
Part No.
Size
J4707MCF
7mm
J4712MCF
12mm
J4708MCF
8mm
J4713MCF
13mm
J4710MCF
10mm
J4714MCF
14mm
J4711MCF
11mm
--
--

Blackhawk Hand Tools 3/8″ Drive Fractional Crowfoot Wrenches

  • Crowfoot wrenches are used in hard to reach, restricted access situations where a standard wrench or ratchet cannot reach
  • Typically used in lower torque applications
  • Full polish finish provides corrosion resistance and easy to clean surfaces
Part No.
Size
Part No.
Size
BCF-12
3/8"
BCF-22
11/16"
BCF-14
7/16"
BCF-24
3/4"
BCF-16
1/2"
BCF-26
13/16"
BCF-18
9/16"
BCF-28
7/8"
BCF-20
5/8"
BCF-32
1"

Proto 3/8″ Drive Fractional Crowfoot Wrenches

  • Crowfoot wrenches are used in hard to reach, restricted access situations where a standard wrench or ratchet cannot reach
  • Anti-Slip Design open end (ASD)
  • The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding
  • Broad size range ensures the right tool for the application will be available
  • Typically used in lower torque applications
  • Full polish finish provides corrosion resistance and easy to clean surfaces
  • Locking hole on 3/8″ drive crowfoot wrenches available on fractional openings 1″ and larger
Part No.
Size
Part No.
Size
J4912CF
3/8"
J4956CF
1-3/4"
J4914CF
7/16"
J4958CF
1-13/16"
J4916CF
1/2"
J4960CF
1-7/8"
J4918CF
9/16"
J4962CF
1-15/16"
J4920CF
5/8"
J4964CF
2"
J4922CF
11/16"
J4966CF
2-1/16"
J4924CF
3/4"
J4968CF
2-1/8"
J4926CF
13/16"
J4970CF
2-3/16"
J4928CF
7/8"
J4972CF
2-1/4"
J4930CF
15/16"
J4974CF
2-5/16"
J4932CF
1"
J4976CF
2-3/8"
J4934CF
1-1/16"
J4978CF
2-7/16"
J4936CF
1-1/8"
J4980CF
2-1/2"
J4938CF
1-3/16"
J4982CF
2-9/16"
J4940CF
1-1/4"
J4984CF
2-5/8"
J4942CF
1-5/16"
J4986CF
2-11/16"
J4944CF
1-3/8"
J4988CF
2-3/4"
J4946CF
1-7/16"
J4990CF
2-13/16"
J4948CF
1-1/2"
J4992CF
2-7/8"
J4950CF
1-9/16"
J4994CF
2-15/16"
J4952CF
1-5/8"
J4996CF
3"
J4954CF
1-11/16"
--
--

Blackhawk Hand Tools 3/8″ Drive Metric Crowfoot Wrenches

  • Crowfoot wrenches are used in hard to reach, restricted access situations where a standard wrench or ratchet cannot reach
  • Typically used in lower torque applications
  • Full polish finish provides corrosion resistance and easy to clean surfaces
Part No.
Size
Part No.
Size
BCF-10M
10mm
BCF-16M
16mm
BCF-11M
11mm
BCF-17M
17mm
BCF-12M
12mm
BCF-19M
19mm
BCF-13M
13mm
BCF-21M
21mm
BCF-14M
14mm
BCF-22M
22mm
BCF-15M
15mm
--
--

Proto 3/8″ Drive Metric Crowfoot Wrenches

  • Crowfoot wrenches are used in hard to reach, restricted access situations where a standard wrench or ratchet cannot reach
  • Anti-Slip Design open end (ASD)
  • The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding
  • Broad size range ensures the right tool for the application will be available
  • Typically used in lower torque applications
  • Full polish finish provides corrosion resistance and easy to clean surfaces
  • Locking hole feature helps keep the crowfoot wrench engaged on the extension during use reducing downtime due to detachment of crowfoot in awkward spaces
  • Use with locking extensions to reach into spaces too small for a mechanic’s arm or where the fastener is out of site
  • Locking hole on 3/8″ drive crowfoot wrenches available on fractional openings 1″ and larger
Part No.
Size
Part No.
Size
J4909MCF
9mm
J4917MCF
17mm
J4910MCF
10mm
J4918MCF
18mm
J4911MCF
11mm
J4919MCF
19mm
J4912MCF
12mm
J4920MCF
20mm
J4913MCF
13mm
J4921MCF
21mm
J4914MCF
14mm
J4922MCF
22mm
J4915MCF
15mm
J4923MCF
23mm
J4916MCF
16mm
J4924MCF
24mm

3/8″ Drive Fractional Flare Nut Crowfoot Wrenches – 6 & 12 Point

  • Flare Nut Crowfoot wrenches are used in hard to reach or restricted access situations where a standard flare nut wrench cannot reach
  • The flare nut slot opening is used to slide over hydraulic lines or other hoses which allows for easy access to hex connectors at ends
  • Typically used in low torque applications
  • Full polish finish provides corrosion resistance and easy to clean surfaces
  • Locking hole feature helps keep the crowfoot engaged on the extension during use, helping to reduce downtime and improve working efficiency
  • Use with locking extensions to reach into small spaces where the fastener is out of sight
Part No.
Size
Part No.
Size
J4912HFL
3/8"
J4920HFL
5/8"
J4914HFL
7/16"
J4922HFL
11/16"
J4916HFL
1/2"
J4924HFL
3/4"
J4918HFL
9/16"
J4926HFL
13/16"

Proto 3/8″ Drive Fractional Flare Nut Crowfoot Wrenches – 12 Point

  • Designed for speed and safety
  • Special heat-treated alloy steel helps increase strength and durability
  • 12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6 and 12 point fasteners
  • Full polish finish provides corrosion resistance and easy to clean surfaces
  • Locking hole helps hold crowfoot in place during use.
  • Use with a locking extension to help prevent tool loss in awkward locations
Part No.
Size
Part No.
Size
J4920FL
5/8"
J4928FL
7/8"
J4922FL
11/16"
J4930FL
15/16"
J4924FL
3/4"
J4932FL
1"
J4926FL
13/16"
J4934FL
1-1/16"

Proto 3/8″ Drive Metric Flare Nut Crowfoot Wrenches – 6 Point

  • Flare Nut Crowfoot wrenches are used in hard to reach or restricted access situations where a standard flare nut wrench cannot reach
  • The flare nut slot opening is used to slide over hydraulic lines or other hoses which allows for easy access to hex connectors at ends
  • Typically used in low torque applications
  • Full polish finish provides corrosion resistance and easy to clean surfaces
  • Locking hole feature helps keep the crowfoot engaged on the extension during use, helping to reduce downtime and improve working efficiency
  • Use with locking extensions to reach into small spaces where the fastener is out of sight
Part No.
Size
Part No.
Size
J4909MHFL
9mm
J4914MHFL
14mm
J4910MHFL
10mm
J4915MHFL
15mm
J4911MHFL
11mm
J4916MHFL
16mm
J4912MHFL
12mm
J4917MHFL
17mm
J4913MHFL
13mm
J4918MHFL
18mm

Proto 1/2″ Drive Fractional Full Polish Crowfoot Wrenches

  • Crowfoot wrenches are used in hard to reach, restricted access situations where a standard wrench or ratchet cannot reach
  • Anti-Slip Design open end (ASD)
  • The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding
  • Broad size range ensures the right tool for the application will be available
  • Typically used in lower torque applications
  • Full polish finish provides corrosion resistance and easy to clean surfaces
  • Locking hole feature helps keep the crowfoot wrench engaged on the extension during use reducing downtime due to detachment of crowfoot in awkward spaces
  • Use with locking extensions to reach into spaces too small for a mechanic’s arm or where the fastener is out of site
Part No.
Size
Part No.
Size
J5330CF
15/16"
J5352CF
1-5/8"
J5332CF
1"
J5354CF
1-11/16"
J5334CF
1-1/16"
J5356CF
1-3/4"
J5336CF
1-1/8"
J5358CF
1-13/16"
J5338CF
1-3/16"
J5360CF
1-7/8"
J5340CF
1-1/4"
J5364CF
2"
J5342CF
1-5/16"
J5368CF
2-1/8"
J5344CF
1-3/8"
J5372CF
2-1/4"
J5346CF
1-7/16"
J5376CF
2-3/8"
J5348CF
1-1/2"
J5378CF
2-7/16"
J5350CF
1-9/16"
J5380CF
2-1/2"

Proto® 1/2″ Drive Metric Full Polish Crowfoot Wrenches

  • Crowfoot wrenches are used in hard to reach, restricted access situations where a standard wrench or ratchet cannot reach
  • Anti-Slip Design Open End (ASD)
  • The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding
  • Broad size range ensures the right tool for the application will be available
  • Typically used in lower torque applications
  • Full polish finish provides corrosion resistance and easy-to-clean surfaces
  • Locking hole feature helps keep the crowfoot wrench engaged on the extension during use reducing downtime due to detachment of crowfoot in awkward spaces
  • Use with locking extensions to reach into spaces too small for a mechanic’s arm or where the fastener is out of site
Part No.
Size
Part No.
Size
J5320MCF
20mm
J5329MCF
29mm
J5321MCF
21mm
J5330MCF
30mm
J5322MCF
22mm
J5332MCF
32mm
J5323MCF
23mm
J5335MCF
35mm
J5324MCF
24mm
J5336MCF
36mm
J5325MCF
25mm
J5338MCF
38mm
J5326MCF
26mm
J5341MCF
41mm
J5327MCF
27mm
J5342MCF
42mm
J5328MCF
28mm
J5346MCF
46mm

1/2″ Drive Fractional Flare Nut Crowfoot Wrenches

  • Designed for speed and safety
  • Special heat-treated alloy steel helps increase strength and durability
  • 12 point Box end allows for fine indexing, helping to improve speed and access. Fits 4, 6 and 12 point fasteners
  • Full polish finish provides corrosion resistance and easy to clean surfaces
Part No.
Size
Part No.
Size
J5336FL
1-1/8"
J5352FL
1-5/8"
J5338FL
1-3/16"
J5354FL
1-11/16"
J5340FL
1-1/4"
J5356FL
1-3/4"
J5342FL
1-5/16"
J5358FL
1-13/16"
J5344FL
1-3/8"
J5360FL
1-7/8"
J5346FL
1-7/16"
J5362FL
1-15/16"
J5348FL
1-1/2"
J5364FL
2"
J5350FL
1-9/16"
--
--
  • Contact Heavy Maintenance Supply 205-384-5284 for more information

Search


Our Products

Call HMS, Inc. Today!

Phone: 205.384.5284
Toll-Free: 800.822.5284
Fax: 205.384.5283

Heavy Maintenance Supply | 205.384.5284 | 800.822.5284 | 1803 Fifth Avenue South, Jasper, Alabama, 35501