Proto® 3/4″ Drive Fractional Impact Sockets – 4 Point
- Drive end chamfer and four detents help provide quick positive engagement with drive tool on any of the socket drive walls
- Tight tolerances for snug fit on fastener
- Large clearance holes, concentric opening and nut end chamfer make it easy to position socket on fasteners
- Made from high-strength steel to help minimize wall thickness and provide access to fasteners in recesses and where nuts and bolts protrude
- Impact sockets are used where ever powered drive tools are used to install or remove fasteners
- Impact sockets are designed to withstand the high torque and force associated with impact tools in repetitive application
- Features two through holes and a groove to accept a Proto® Retaining Ring or pin and o-ring to help secure the socket to the drive tool anvil
- Stamped size for easy reference
- Side locking hole
| Part No. | Size | Part No. | Size |
| J07517MT | 17mm | J07531MT | 31mm |
| J07519MT | 19mm | J07532MT | 32mm |
| J07520MT | 20mm | J07533MT | 33mm |
| J07521MT | 21mm | J07534MT | 34mm |
| J07522MT | 22mm | J07535MT | 35mm |
| J07523MT | 23mm | J07536MT | 36mm |
| J07524MT | 24mm | J07538MT | 38mm |
| J07525MT | 25mm | J07540MT | 40mm |
| J07526MT | 26mm | J07541MT | 41mm |
| J07527MT | 27mm | J07542MT | 42mm |
| J07528MT | 28mm | J07543MT | 43mm |
| J07529MT | 29mm | J07546MT | 46mm |
| J07530MT | 30mm | J07550MT | 50mm |
- Contact Heavy Maintenance Supply 205-384-5284 for more information
