PowerTeam Series C Single Acting Hydraulic Cylinders

• Single Acting spring return cylinders
• For working pressures up to 10,000 psi
• Capacities of 5 to 100 tons, with stroke lengths of 1.00″ to 16.00″
• Fully comply with ASME B30.1 standards

Lifting Handle

PowerTeam RA Single-Acting Aluminum Cylinders

• For working pressures to 10,000 psi
• Capacities of 20 to 100 tons
• Stroke lengths of 2.13″ to 10.00″
• Half the weight of steel cylinders of comparable capacity
• Fully comply with ASME B30.1 standard

Aluminum Cylinder Base – Part No. 208406

• For use when an enlarged cylinder base is needed
• Attaches to the bottom of the RA556 and RA5510 with four 3/8″ – 16 screws (included)
• Serrated base for extra stability
• 7″ square

Lifting Handles

Swivel Caps

PowerTeam Series RLS Low Profile Spring-Return Cylinders

• For working pressures to 10,000 psi
• Capacities of 5 to 150 tons, stroke lengths of 0.44″ to 0.63″
• Low profile for limited clearance lifting jobs
• Fully comply with ASME B30.1 standard

PowerTeam “Shorty” RSS Spring Return Hydraulic Cylinders

• For working pressures up to 10,000 psi
• Capacities of 10 to 250 tons, stroke lengths of 1.50″ to 3.00″
• Heavy duty return spring on all models except RSS1002D
• Fully comply with ASME B30.1 standard

PowerTeam RH Single-Acting “Center-Hole” Cylinders

• For working pressures to 10,000 psi
• Capacities of 10 to 100 tons
• Stroke lengths 0f 0.31″ to 8.00″
• “Center Hole” design allows you to run cables, screw etc., through the center of the cylinder, enabling cylinder to push or pull, if a pull rod is used
• Cylinders comply with ASME B30.1 standard and withstand full “dead-end” loads

Lifting Handles

PowerTeam RH Series Double-Acting Center-Hole Cylinders

• For working pressures to 10,000 psi
• Capacities of 30 to 200 tons
• Stroke lengths of 1.50″ to 10.13″
• Center Hole design allows you to run cables, screws etc., through the center of the cylinder, enabling cylinder to push or pull, if a pull rod is used
• Cylinders withstand full “dead-end” loads, comply with ASME B30.1 standard

PowerTeam Center Hole Single/Double Acting Cylinders

• Cylinders withstand full “dead-end’ loads
• Compact design is ideal for applications in which space is limited
• Basic head can be changed from a tapped hole to plain hole by simply changing the insert
• Pistons have “Power-Tech” treatment for corrosion and abrasion resistance
• Complies with ANSI/ASME B30.1 safety standards

*  The RT1004 has a bypass when full stroke is reached, preventing over-pressurization of the cylinder

• Contact Heavy Maintenance Supply 205-384-5284 for more information