Proto® Smart .5% Bench Mount Transducer |

Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required
Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions
Broad accuracy range extends from 10% to 100% of full scale
Three units of measure are available ft-lb, in-lb, and Nm
Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches)
Fast sampling rate helps maintain high accuracy during torque applications
Each tester is built with a male square drive and also comes supplied with a female-to-female square drive adapter
Powered by a standard 9V battery, providing up to 50 hours run time
N.I.S.T. (National Institute of Standards and Technology) traceable certification supplied with each tester
Optional all-steel stand (J6470S) provides a strong support with minimal footprint
Testers meet or exceed requirements set forth in ASME B107.29

Part No.	USB Part Nol.	Drive Size	Torque Range ft./lbs.	Torque Range in./lbs.	Increments ft./lbs.	Increments in./lbs.	Size
J6470	J6470-C	1/4"	0.42-4.17	5-50	0.01	0.01	6" Width x 4-1/2" Height x 6" Length
J6472	J6472-C	3/8"	2.1-20.8	25-250	0.01	0.10	6" Width x 4-1/2" Height x 6" Length
J6474	J6474-C	3/8"	5-50	60-600	0.01	0.10	6" Width x 4-1/2" Height x 6" Length
J6476	J6476-C	1/2"	25-250	300-3000	0.10	1.00	6" Width x 4-1/2" Height x 6" Length
J6478	J6478-C	3/4"	60-600	720-7200	0.10	1.00	6" Width x 4-1/2" Height x 6" Length

Home » Our Manufacturers » Proto® Torque Tools » Proto® Smart .5% Bench Mount Transducer