Torque Wrench Accessories |

In-line extension transducers, connect between a wrench and a socket to measure the torque that is applied to a fastener. This versatile type of transducer converts a hand held torque meter (J6360) into a highly accurate digital torque wrench. In-line transducers can also be used as torque wrench testers when mounted to a fixture

Part No.	Description	Drive Size	Type
J6361	1% 20-250 in./lbs.	3/8"	Extension
J6362	1% 5-50 ft./lb.	3/8"	Extension
J6363	1% 15-150 ft./lb.	1/2"	Extension
J6364	1% 25-250 ft./lb.	1/2"	Extension
J6365	5% 10-100 in./lb.	1/4"	Bench
J6366	5% 25-250 in./lb.	1/4"	Bench
J6367	5% 5-50 ft./lb.	3/8"	Bench
J6368	5% 25-250 ft./lb.	1/2"	Bench
J6369	5% 50-500 ft./lb.	3/4"	Bench

j6370_03

Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required
Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions
Broad accuracy range extends from 10% to 100% of full scale
Three units of measure are available ft-lb, in-lb, and Nm
Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches)
Fast sampling rate helps maintain high accuracy during torque applications
Each tester is built with a male square drive and also comes supplied with a female-to-female square drive adapter
Powered by a standard 9V battery, providing up to 50 hours run time
N.I.S.T. (National Institute of Standards and Technology) traceable certification supplied with each tester
Optional all-steel stand (J6470S) provides a strong support with minimal footprint
Testers meet or exceed requirements set forth in ASME B107.29

Part No.	USB Part Nol.	Drive Size	Torque Range ft./lbs.	Torque Range in./lbs.	Increments ft./lbs.	Increments in./lbs.	Size
J6470	J6470-C	1/4"	0.42-4.17	5-50	0.01	0.01	6" Width x 4-1/2" Height x 6" Length
J6472	J6472-C	3/8"	2.1-20.8	25-250	0.01	0.10	6" Width x 4-1/2" Height x 6" Length
J6474	J6474-C	3/8"	5-50	60-600	0.01	0.10	6" Width x 4-1/2" Height x 6" Length
J6476	J6476-C	1/2"	25-250	300-3000	0.10	1.00	6" Width x 4-1/2" Height x 6" Length
J6478	J6478-C	3/4"	60-600	720-7200	0.10	1.00	6" Width x 4-1/2" Height x 6" Length

Designed to provide protection during storage and when transporting wrenches from one job location to another
Available separately

Proto Torque Multipliers provide overload protection with replaceable output square drives that are designed to twist off at 3%-10% over maximum output capacity

1/4″ to 1″ ratchet wheels made from alloy steel for uncompromising strength and durability
Field repair your torque wrench ratchet head easily with the corresponding repair kit

Home » Our Products » Torque Wrench Accessories